Phone
+8615093226588
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.
The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel.
Diameter Range: 0.2-5.00 mm
Surface Finish: Electro Galvanizing
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.
Nominal Diameter | Minimum Coating Mass (g/m2) |
over 0.6mm up to and incl. 0.65mm | 25 |
over 0.75mm up to and incl. 0.85mm | 25 |
over 0.85mm up to and incl. 0.95mm | 25 |
over 0.95mm up to and incl. 1.06mm | 25 |
over 1.06mm up to and incl. 1.18mm | 25 |
over 1.18mm up to and incl. 1.32mm | 30 |
over 1.32mm up to and incl. 1.55mm | 30 |
over 1.55mm up to and incl. 1.80mm | 30 |
over 1.80mm up to and incl. 2.24mm | 30 |
over 2.24mm up to and incl. 2.72mm | 35 |
over 2.72mm up to and incl. 3.15mm | 35 |
over 3.15mm up to and incl. 3.55mm | 45 |
over 3.55mm up to and incl. 4.25mm | 50 |
over 4.25mm up to and incl. 5.00mm | 50 |
Standard Galvanized Wire is manufactured to comply with the following diameter tolerances:
Nominal Wire Diameter | Tolerance (mm) |
over 0.80mm up to and incl. 1.60mm | +/-0.03 |
over 1.60mm up to and incl. 2.50mm | +/-0.03 |
over 2.50mm up to and incl. 4.00mm | +/-0.03 |
over 4.00mm up to and incl. 6.00mm | +/-0.03 |
over 6.00mm up to and incl. 10.00mm | +/-0.03 |
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
Grade | Tensile Strength (Mpa) |
Galvanised – Soft Quality | 380/550 |
Galvanised – Medium Quality | 500/625 |
Galvanised – Hard Quality | 625/850 |
Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
Tensile Grade | % Carbon | % Phosphorus | % Manganese | % Silicon | % Sulphur |
Soft | 0.05 max | 0.03 max | 0.05 max | 0.12-0.18 | 0.03 max |
Medium | 0.15-0.19 | 0.03 max | 0.70-0.90 | 0.14-0.24 | 0.03 max |
Hard | 0.04-0.07 | 0.03 max | 0.40-0.60 | 0.12-0.22 | 0.03 max |
Q: Are you Trading company or Manufacturer ?
A: We are manufacturer(Factory) in wire industry for more than 20 years.
Q: Producing Capacity?
A: The producing capacity totally is 8, 500 tons per month. The producing capacity of this product is 1,500 tons per month.
Q: Main Market?
A: Our main market is foreign customers. 80% of the products are for exporting. The main countries are Japan, South Korea, South Asian area, Canada etc.
Q: What information should I provide when inquiring?
A: The diameter before pvc coating; after pvc coating, the requirement of the core wire like zinc coating, tensile strength, packing, colour
Q: What is the MOQ?
A: For quality checking, we accept small quantity order like one coil. For normal cooperation, we prefer FCL container quantity to ensure the safety of goods in transportation.
Q: Can you accept the special order as per customer offering drawing?
A: Yes,we can.OEM is available.we can customized according to requirement.
Q: What kind of payment does your company support?
A: T/T,L/C at sight,Cash,Western Union are all accepted
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample within 2kg for free charge but do not pay the cost of freight.
Q: Third Party Inspection available?
A: Yes, available. The charges are on the buyer.
If you have another question, pls feel free to contact us as below:
Contact: Tel/(wechat):+8613938576991 whatsapp:+8613938576991 Email: zhiyitian2008@gmail.com
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!